Български
KITCHEN & BATHROOM REPAIR KIT
59.34 lv.
Fix chips in your sink, bath or appliances easily with our Kitchen & Bathroom Repair Kit.
Colors: White
Usage: Sinks, baths, showers, white goods & tiles. Don’t use on plastic
Durability: Waterproof and mould resistant
Fix chips in your sink, bath or appliances easily with our Kitchen & Bathroom Repair Kit.
- It leaves a tough repair that won’t chip or peel off.
- The kit also comes with sandpaper so everything you need is in one package.
- A tough repair for ugly chips
- Suitable for porcelain, enamel, acrylic and fiberglass
- Waterproof
- The kit contains everything you need to get the job done including a small applicator, foil pack of hardener, a tube of filler and a bottle of touch-up enamel
How to repair chips and cracks in kitchens & bathrooms
Before you start
1. Make sure the area is clean and dry. Open your doors and windows for extra ventilation.
2. Test the colour of the enamel on a small, hidden area to make sure you’re happy with the colour.
3. Lightly sand the damaged area to get rid of any loose bits and wipe down with a damp cloth.
4. Leave to dry before using the repair kit.
Application
1. Squeeze out as much of the filler as you need.
2. Mix in a small amount of hardener and keep mixing until it’s all blended together.
3. Using the applicator, pack the filler into the chip, leaving it slightly raised above the surface.
4. Leave it to dry for 30 minutes.
5. Once dry, sand to a smooth finish. For enamel and porcelain, use the brown sandpaper. For ceramic and fibreglass, use the black sandpaper with a little bit of water.
6. Wipe away any dust and leave to dry.
7. Shake the bottle of Touch-up Enamel for two minutes.
8. Apply one thin coat and wait two hours to dry.
9. Apply another one or two coats.
10. It will be touch dry in one hour but leave it 24 hours before getting wet and four days until fully submerging it in water.
Aftercare
Cleaning
Once dry, you can clean the filled patch the same way you do the rest of the appliance.
Technical specification
Usage: Sinks, baths, showers, white goods & tiles. Don’t use on plastic
Coverage: Up to 8m2 per litre
Dry time: Filler: 30 minutes; Enamel: 24 hours
Coat time: 24 hours
Number of coats: 2-3
Colors: White
Finish: Satin and Gloss
Durability: Waterproof and mould resistant
Application: Brush
VOC: High
Related products
19.80 lv.
Painting roller holders
44.90 lv.
88.90 lv.
Painting roller holders
9.40 lv.
22.90 lv.
Uncategorized
23.90 lv.
49.90 lv.
Painting roller holders
49.90 lv.