Where can i use it: Terracotta, stone, wood, metal and brick (don”t use on decking,stainless steel,cast iron or areas You”ll walk on)
How many coats: 2 coats
How much will it cover: this 750 ml. tin will cover 7 m2.with 2 coats.
Dry times: Touch in dry in 2 hours.Recoat and paint over in 4 hours.
Clean up: Wash your brushes in warm, soapy water.
Before you start, make sure you choose a warm dry day (above 10C). Put down dust sheets to cover anything you don”t wants to det paint on.
Prep-Bare Wood
Our exterior All Surface Primer&Undercoat is fine to use on bare wood. (But for the best results use our Super Flexible Primer&Undercoar). Lightly sand your wood,using 120 grit sandpaper. Sand in the direction of the woodgrain and remember to wear a face mask. Then wipe down with white spirit. Fill any imperfections with our multi Purpose Wood filler.
Peip-Brick, Terracotta&Stone
Get rid of any dirt and loose bits. The best way to do this is with a jet wash. But you can use a stiff brush and water. Then leave to dry.
Prep-Metal
Use a wire brush to remove any rust and remove any dirt. Then wipe down with white spirit. Don’t use on newly galvanised metal.
Prep-Previosly painted surface
If you old paint is in good condition just give it a light sand with 240 g. Sandpaper. This’ll help the Primer&Undercoat stick. If your paint is flaking or cracked you’ll need to sand it back tothe bare surface. The easier way to do this is with an electric sander and 120 grit sandpaper.It can create a lot of dust,so make sure you wear a face mask. Then wipe with white spirit. (Be careful preparing any surfaces that were painted before 1960,as they may be caoted with lead paint. For more info give our Technical Services Team a call on 01142409469.
Using our Exterior All Surface Primer&Undercoat
Give it a really good stir. Than paint it on with a sinthetic brush. You will need to put 2 coats on.Leave 4 hours between coats. After 2 hours it’ll be touch dry, but leave it 4 hours before painting over.
Clean up
Take off as much paint off your brushes as you can. Than wash them in warm,soapy water. Don’t empty any left over paints into drans or watercourses. Your local authority may have special ways to get rid of unused paints
Read label before use. Keep out of reach of children. If medical advice is needed,have product container or label at hand.
Our exterior All Surface Primer&Undercoar can be used on just about any bare or painted outdoor surface. In helps your paint to stick,covers boid colours and hides dark marks. So whatever you’re painting,all you need to prep the surface is this one tin!
Size: 750 ml