COLRON REFINED BEESWAX APNE

Preparation:

Colron Refined Beeswax should be applied over bare wood. All previous coatings should be removed. It is not suitable for use over previously varnished or waxed wood.

Application:

1. Apply a thin coat of Colron Refined Beeswax using a soft lint free cloth. Finish in the direction of the grain.

2. Allow to dry for about 15 minutes.

3. Buff the wax along the wood grain with a clean lint free cloth.

4. Leave for about 2 hours before applying a second coat.

5. Further coats will provide a deeper intensity of color and offer added protection.

This product is not recommended for areas where it will come into contact with excessive water. If water is spilt onto the surface gently dab with an absorbent dry cloth or tissue, do not rub the wet surface. Do not place hot items directly onto the finished surface.

Clean up:

Dispose of application cloths safely. Some local authorities have special facilities for disposing of waste products. Do not empty into drains or watercourses.