- Guaranteed to last 10 years
- Quick and easy to apply
- Water-based
- Recoat in 4 hours
- BBA approved
How to use 10 Year Woodstain
Before you start
Sand the wood with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Stir well before use and test on a small area to check you are happy with the colour.
Application
Use a synthetic brush and apply 3 coats in the direction of the grain. Leave 4 hours between each coat and lightly sand with 240 grit paper before the final coat.
Aftercare – Cleaning
Remove any woodstain from your brush and wash in warm, soapy water. Don’t put any left over woodstain down the drain or into watercourses. Your local authority may have facilities to get rid of unused woodstain.
Technical Specification
Usage: Exterior smooth paned doors and windows
Coverage: Up to 18m2 per litre
Dry time: Rainproof in one hour, completely dry in 12 hours
Coat time: Four hours
Number of coats: Three
Colours: Dark Oak, Deep Mahogany, Natural Oak, Teak, Walnut
Finish: Satin
Durability: Lasts 10 years
Application: Brush
Woodstain base: Water
Sizes: 0.75L
VOC: Low