- An all-in-one kit for quick repairs
- Not just for enamel – suitable for porcelain, acrylic, fiberglass and appliances
- Waterproof finish
- Complete with a brush applicator for easy use
- Leaves a long lasting smooth white finish
- Can be used on flaws, scratches, chips, defects and minor damage
How to touch up damaged enamel
Before you start
1. Make sure the area is clean and dry.
2. Test the enamel on a small, hidden patch to make sure you’re happy with the colour.
3. If you are happy with the colour, lightly sand the damaged area to get rid of any loose material.
4. Wipe the area down with a damp cloth and leave it to dry.
Application
1. Shake the bottle for two minutes before you use it.
2. Brush on the first coat.
3. Wait two hours for it to dry.
4. Apply another one or two coats, leaving two hours between each coat.
5. After the final coat, wait 24 hours before getting it wet. The area will be touch dry in one hour so don’t worry if you brush up against it. Wait four days before submerging the area in water.
Aftercare
Cleaning
Once the repaired area is completely dry, you can clean it as normal.
Maintenance
Regularly inspect the area for any additional chips or scratches. If you notice any, you just need to clean the area and apply another coat.
Technical specification
Usage: Sinks, baths, porcelain, ceramic tiles, washing machines, kitchen stoves
Dry time: Touch dry in 1 hour, recoat in 2 hours. Leave it 24 hours before getting wet & 4 days before submerging in water
Coat time: Two hours
Number of coats: Two or three
Colours: White
Durability: Fills chips and scratches to prevent further damage
Application: Brush included
Sizes: 10ml